Activity
From 09/20/2022 to 09/29/2022
09/29/2022
- 03:58 PM Support #40: 星微设备-同步代码以及工具配置
- 无锡星微科技有限公司
09/26/2022
- 03:14 PM Feature #124 (New): 日期控件-不能支持中英文切换
09/25/2022
- 03:07 PM Feature #122 (Closed): 灯的参数设置换成滑动条
09/23/2022
- 04:01 PM Bug #121 (New): 弓形路径规划列拼错位28个像素-熊工反应
09/22/2022
- 01:56 PM Support #94 (Resolved): 晶圆角度校正 - 1、测试设置 好参数之后，执行Run函数是否能够准确计算出角度
- 01:56 PM Support #120 (Resolved): test
- 01:55 PM Support #120 (Closed): test
- 01:55 PM Bug #90 (Resolved): 图片底端状态条在 大点的屏幕上显示不全
- 01:54 PM Bug #106 (Resolved): test
- 01:53 PM Bug #114 (Resolved): UCCamVpGrab 界面的曝光时间未与floatdevice参数关联上
- 01:53 PM Bug #109 (Resolved): 晶圆不能选直径为100mm
- 01:53 PM Bug #119 (Resolved): test
- 01:52 PM Bug #119 (Closed): test
- 01:52 PM Bug #118 (Resolved): coding
- 01:52 PM Bug #118 (Closed): coding
- 01:51 PM Feature #107 (Resolved): 告警模块 Alarms
- 01:51 PM Feature #117 (Resolved): test
- 01:49 PM Feature #117 (Closed): test
- 01:50 PM Feature #116 (Resolved): coding
- 01:49 PM Feature #116 (Closed): coding
09/21/2022
- 11:34 AM Feature #115: 加下选项20倍的镜头，标定文件要存储以备用
- 这个倍率应该做成配置文件，还有一台设备是4、6寸的，然后物镜转塔是5个孔
- 11:21 AM Feature #115 (Closed): 加下选项20倍的镜头，标定文件要存储以备用
- 09:27 AM Bug #109: 晶圆不能选直径为100mm
- !clipboard-202209210927-mwjzu.png!
加个100的选项 - 08:30 AM Bug #114 (Closed): UCCamVpGrab 界面的曝光时间未与floatdevice参数关联上
- 08:29 AM Bug #113 (New): X[-240.167, 241.160] x向 轴绝对运动时，报异常提示，已录视频
09/20/2022
- 02:55 PM Bug #112 (New): 单元测试用例抓不到图
- 02:54 PM Bug #111 (New): 当脉冲宽度设为1微米时不出图
- 02:53 PM Bug #110 (New): 倍率为10倍时没有联动切换
- 02:53 PM Bug #109 (Closed): 晶圆不能选直径为100mm
Also available in: Atom