Activity
From 09/04/2022 to 09/13/2022
09/13/2022
- 05:50 PM Feature #79 (Closed): 路径规划界面增加ROI图像宽和高的设置
- 路径规划界面增加ROI图像宽和高的设置
1.采图拼接用视野宽和高
2.拼接die用Site宽和高
- 02:56 PM Feature #78 (Closed): CCS PFBR-150SW如何开启和设置光源亮度？
- 默认IP地址是192.168.0.2
1. CCS的IP要对 2. CCS不能是人工控制模式 - 02:52 PM Feature #77 (New): 研究ACS的控制器
- Ch.PegIncNT(MotionFlags.ACSC_AMF_ACCURATE, motors[axis].id, pegWidth, firstPoint, dir * pegInterval, lastPoint, Api....
- 02:49 PM Bug #76 (Closed): 圆状进度条 自定义控件太大，导致小屏幕上显示不全
- 02:48 PM Feature #75 (Closed): Test Recipe 界面 在屏幕小的电脑上显示过大，无法拖动窗口大小
- 自适应功能未实现
- 02:46 PM Bug #54 (Resolved): UCAlgorithmParamsSetting界面排版有问题，有些控件已经超过范围了
- 02:44 PM Feature #55 (Resolved): 支持远程调试和脱机运行
- 02:44 PM Feature #74 (Resolved): test
- 02:44 PM Feature #74 (Closed): test
- 02:44 PM Feature #73 (Resolved): coding
- 02:43 PM Feature #73 (Closed): coding
- 02:43 PM Feature #64 (Resolved): UCSensorManu - 用相机的图像显示控件，然后用上面选择的物镜倍率
- 02:42 PM Feature #66 (Resolved): test
- 02:42 PM Feature #65 (Resolved): coding
- 02:38 PM Feature #67 (Resolved): 在test recipe界面 隐藏 上一个晶圆->下一个晶圆
- 02:38 PM Feature #72 (Resolved): test
- 02:37 PM Feature #72 (Closed): test
- 02:37 PM Feature #71 (Resolved): coding
- 02:37 PM Feature #71 (Closed): coding
- 02:36 PM Feature #68 (Resolved): 实现”下一步“按钮的背后逻辑，遍历tree view 叶节点
- 02:36 PM Feature #70 (Resolved): test
- 02:35 PM Feature #70 (Closed): test
- 02:36 PM Feature #69 (Resolved): coding
- 02:35 PM Feature #69 (Closed): coding
09/09/2022
- 09:52 AM Feature #68 (Closed): 实现”下一步“按钮的背后逻辑，遍历tree view 叶节点
- 09:48 AM Feature #67 (Closed): 在test recipe界面 隐藏 上一个晶圆->下一个晶圆
1. 在test recipe界面 隐藏 “上一个晶圆->下一个晶圆”
2.在history界面显示“上一个晶圆->下一个晶圆”
09/07/2022
- 05:16 PM Feature #66 (Closed): test
- 05:15 PM Feature #65 (Closed): coding
- 05:15 PM Feature #61 (In Progress): 1.样本规划和检测训练界面die选择部分的参数优化
- 05:14 PM Feature #10: DieMp:Stitch按钮执行拼接扫描路径路径规划，扫描路径暂定是矩形然后以弓字形的路径运行
- 发现2个问题，一个是图片张数，测一行的统计张数比用公式算出来的要少一张，2.测晶圆最中间那行时，发现圆周有一边没采集到，不知是那个chuck center有点偏，还是相机偏导致的问题
- 04:57 PM Feature #64 (Closed): UCSensorManu - 用相机的图像显示控件，然后用上面选择的物镜倍率
09/05/2022
- 04:36 PM Feature #62 (Closed): 建立recipe保存和加载已有文件部分的界面优化
- 04:36 PM Feature #61 (Closed): 1.样本规划和检测训练界面die选择部分的参数优化
- 10:03 AM Bug #60 (New): warning MSB3270: There was a mismatch between the processor architecture of the project being built "AMD64" and the processor architecture of the reference "Cognex.VisionPro.ImageFile, Version=61.1.0.0
- Build started...
1>------ Build started: Project: JZIntelli.WaferInspect, Configuration: Debug x64 ------
1>C:\Prog... - 09:09 AM Feature #59 (Closed): coding
Also available in: Atom